Saltar al contenido principal
    LT Plastics Site & Traffic Safety

    Speed Bumps for Sale — Heavy-Duty Rubber, Bolt-Down, Any Lane Width

    Rubber speed bumps engineered for real traffic: 2.4 in heavy-duty modules with internal steel-plate reinforcement rated to 176,000 lb, or the 3 in modular profile for cars and light trucks. Expansion anchors ship in the box, 39 in and 20 in sections interlock to your exact lane width in feet, and there is no concrete work or lane closure.

    WhatsApp a specBuild your kit
    • Ships nationwide + Mexico
    • Anchors & hardware included
    • 5-year warranty
    • Quote in 24 hours

    Search terms we serve

    • speed bumps
    • speed bumps for sale
    • rubber speed bumps
    • buy speed bumps
    3 in modular rubber speed bump for parking lots, black and yellow strip with reflective directional arrows, bolt-down speed bump from LT Plastics
    2.4 in Heavy-Duty3 in Modular

    Why specifiers choose this line

    Built to take the hit

    High-density polymeric rubber absorbs impact energy instead of cracking like concrete. 5–10 year service life under 1,000+ vehicles a day, backed by a 5-year LT Plastics warranty.

    Installed in minutes, not days

    Modular sections bolt to asphalt or concrete with the included expansion anchors — 30 to 45 minutes per 10 ft lane, no civil work, no curing, no lane closure. Removable and reusable.

    Sized to your lane, in feet

    Interlocking center modules plus two end caps extend to any lane width — 12 ft driveways, 20 ft parking lanes, 26 ft two-way roads, truck gates. Give us the width in feet and we return the exact piece count in 24 hours.

    The two models we offer

    Two heights — 2.4 in heavy-duty and 3 in modular — cover 95% of private-property traffic calming. Tell us the lane width in feet and we return the exact piece count.

    2.4 in heavy-duty rubber speed bump for sale, yellow and black segmented modules with bolt-down anchor holes, steel-plate reinforced, shipped from Phoenix, AZ
    2.4 in high
    SKU: LTP-SB-24HD
    Target speed: ≤ 10 mph

    2.4 in Heavy-Duty Speed Bump — Steel-Plate Reinforced

    Forklift, truck and trailer lanes — rated to 176,000 lb

    Heavy-duty rubber speed bump molded in high-density polymeric rubber with internal steel-plate reinforcement. Built for plants, distribution yards and dock approaches where forklifts and loaded trailers cross the same lane all day. 39 in center modules interlock to any lane width and bolt straight to asphalt or concrete — no civil work, no curing, no lane closure.

    Best for

    • Warehouse and plant yards with forklift traffic
    • Dock approaches and truck entry gates
    • Distribution centers and cold-storage yards
    • Industrial parks and gated logistics campuses
    WhatsApp

    Specifications

    2.4 in Heavy-Duty Speed Bump — Steel-Plate Reinforced — Specifications
    Center module
    Length39 in (1,000 mm)
    Width17.7 in (450 mm)
    Height2.4 in (60 mm)
    Weight57 lb (26 kg)
    Load rating176,000 lb (88 US tons)
    End cap
    Length10 in (250 mm)
    Width17.7 in (450 mm)
    Height2.4 in (60 mm)
    Weight11 lb (5 kg)
    Load rating176,000 lb (88 US tons)
    General characteristics
    Design speed≤ 10 mph
    MaterialHigh-density polymeric rubber with steel-plate reinforcement
    ColorsYellow / black, molded-in (no repainting)
    ReflectorsReflective inserts on the yellow segments
    MountingBolt-down — expansion anchors included, 1/2 in bit, asphalt or concrete
    Install time30–45 minutes per 10 ft lane
    AssemblyInterlocking 39 in modules + 2 end caps, extends to any lane width
    Cable channelUnderside channel for hose or cable pass-through
    Warranty5-year LT Plastics warranty
    3 in modular rubber speed bump for parking lots, black and yellow strip with reflective directional arrows, bolt-down speed bump from LT Plastics
    3 in high
    SKU: LTP-SB-3IN
    Target speed: ≤ 5 mph

    3 in Modular Rubber Speed Bump

    Light to medium traffic — parking lots, driveways, internal streets

    Modular rubber speed bump with a taller 3 in profile for lanes where you need drivers under 5 mph: parking lots, gated entries, campus loops and internal streets. 20 in center modules keep the piece count and freight cost low, and the vulcanized rubber compound absorbs the impact instead of transmitting it to suspension and tires the way poured concrete does.

    Best for

    • Commercial and retail parking lots
    • HOA and residential community entries
    • School, hospital and hotel driveways
    • Private-property access roads
    WhatsApp

    Specifications

    3 in Modular Rubber Speed Bump — Specifications
    Center module
    Length20 in (500 mm)
    Height3 in (75 mm)
    End cap
    Length10 in (250 mm)
    Height3 in (75 mm)
    General characteristics
    Design speed≤ 5 mph
    MaterialVulcanized high-density rubber compound
    ColorsYellow / black, molded-in (no repainting)
    ReflectorsReflective arrow inserts on the yellow segments
    MountingBolt-down — expansion anchors included, 1/2 in bit, asphalt or concrete
    Install time30–45 minutes per 10 ft lane
    AssemblyInterlocking 20 in modules + 2 end caps, any lane width
    Cable channelUnderside channel for hose or cable pass-through
    Service life5–10 years under heavy traffic
    Warranty5-year LT Plastics warranty

    Kit builder

    Build your speed bump kit

    Pick a model, enter your lane width in feet, and we send back the exact piece list with freight to your site — usually within 24 hours.

    1. Choose the model

    2. Lane width (feet)

    20 ft
    How many bumps?1

    3. Your piece list

    Center modules
    11 pcs
    End caps
    2 pcs
    Total coverage
    20 ft
    3 in Modular · LTP-SB-3IN

    Quote-based — no online pricing. Anchors and hardware are included with every kit.

    Bolt-down installation of a modular rubber speed bump on asphalt with expansion anchors

    Bolt-down installation in 30–45 minutes

    Four steps, two people, one 10 ft lane in under an hour. Works on asphalt or concrete with the expansion anchors in the box. No civil work, no curing, no lane closure — and the units can be unbolted and reused somewhere else.

    1. 1Mark the lane and lay out the modules end to end
    2. 2Drill the pavement with a 1/2 in masonry bit
    3. 3Set the included expansion anchors
    4. 4Bolt outward from the center to the two end caps

    LT Plastics-sourced, batch-tested, warranted

    Every batch is inspected against our spec sheet: durometer, module fit, anchor-hole alignment and reflector adhesion. Shipped nationwide from Phoenix, AZ, quoted in 24 hours, backed by a 5-year LT Plastics warranty.

    One supplier, two divisions

    LT Plastics supplies the polymer hardware that keeps industrial sites moving: FDA-compliant bulk containers and hoppers for material handling, and modular rubber traffic safety for the pavement those forklifts cross.

    Material Handling

    Bulk bins, hoppers, insulated containers, sanitary pallets.

    See material handling

    Site & Traffic Safety

    Modular rubber speed bumps in 2.4 in heavy-duty and 3 in profiles.

    Request Speed Bump Quote
    FAQ

    Questions about speed bumps

    Related pages

    Site & Traffic SafetySpeed HumpsPortable Speed BumpsHeavy-Duty Speed BumpsDriveway Speed BumpsBulk BinsHopper ContainersRequest a Quote

    Learn more: Speed Bumps & Yard Safety

    Open the complete topic guide